Winmate S430M4 Series PDA
User Guide
2. After battery installation, put back the back cover and make sure all the screw
fit with the hole. Screw and fix the back cover.
Battery charging
Please charge the battery before using the device for the first time, charge the battery
until the LED indicator turns solid green. To charge the
docking with appropriate power supply. For more information about the
accessories, see chapter 7
To charge the battery using USB/ Charge cable:
1. Connect the power supply output connector to the input power port on the
USB/Charge cable.
2. Connect the USB/ Charge cable to the bottom of
indicates the battery charging status
LED Status
OFF
Solid Blue
Solid Green
After battery installation, put back the back cover and make sure all the screw
fit with the hole. Screw and fix the back cover.
Please charge the battery before using the device for the first time, charge the battery
until the LED indicator turns solid green. To charge the S430M4, use a cable or a
docking with appropriate power supply. For more information about the
7.
To charge the battery using USB/ Charge cable:
Connect the power supply output connector to the input power port on the
onnect the USB/ Charge cable to the bottom of S430M4. The battery charge LED
battery charging status
LED Status
Indication
S430M4 is not charging
S430M4 is not properly connected to a power source
S430M4 is in charging process
Charging complete
8
After battery installation, put back the back cover and make sure all the screw
Please charge the battery before using the device for the first time, charge the battery
, use a cable or a
docking with appropriate power supply. For more information about the S430M4
Connect the power supply output connector to the input power port on the
. The battery charge LED
is not properly connected to a power source