USER MANUAL
CHAPTER 3
OPERATING THE DEVICE
- 33 -
3.3 Using HF RFID Reader
Notice that HF RFID Reader is an optional feature for 7” S-Series HMI and may not be
present in your device.
HF RFID is commonly used for ticketing, payment, and data
transfer applications.
3.3.1 HF RFID Reader Location
The RFID Reader is located on the bottom right front side of the HMI device.
The COM
Port setting in RFID Reader is “
COM 14
”
To enable the HF RFID Reader feature, perform the following procedure:
1.
Launch RF Scan application.
2.
Tap on
Connect
, and the setting utility will show up as below:
3.
Tap on the
ON
button.
To scan the card, bring it close to the right bottom front side of device with RFID icon.
Tap on the
Disconnect
button to stop the connection with built-in HF RFID reader.
