USER MANUAL
CHAPTER 3
OPERATING THE DEVICE
- 34 -
3.3.2 Trigger Setting
Auto Scan
The default setting for RFID trigger is Auto Scan. Under this setting, the RFID
Reader will always be ready to scan tags.
1. When the RFID tag is detected from RFID antenna, the data will be read
automatically.
2. User can define the RFID scanning frequency from the drop-down menu
shown as below. The frequency can be from 1 second to 9 seconds.
Single Scan
User can also define the RFID Reader scanning as
Single Scan
. Under this setting,
the RFID Reader will be triggered only when user click on “Send”.
3.3.3 Settings
Sound
The
Sound
check box defines whether a beep sound will come with the data
scanning.
Output
This setting defines the output type of the scanned data.
