USER MANUAL
CHAPTER 3
OPERATING THE DEVICE
- 35 -
Two options are available:
Keyboard Wedge
Under this setting, the data scanned is sent like keyboard data. The scanned data
can be output directly to the demo area below this window, or user can also
open other utility, such as Office Word or Notepad files, for data input.
Note:
notice that the input method should support the scanned character.
User can also tap on the
Settings
button for further details settings.
Item
Description
Prefix
User can type in this field to define the characters BEFORE the
data scanned.
Suffix
User can type in this field to define the characters AFTER the
data scanned.
Append
Enter
The check box user can defines to append an “Enter” which is
followed by the characters.
Append
TAB
The check box user can defines to append an “TAB” which is
followed by the characters.
Regex
Filter
Press on “Presets…” button, user can define how many
characters to show after the data scanned.
Replace
User can define specific characters to be replaced with
preferred characters automatically. When the characters
defined in
Regex Substitution
is scanned, the data will be
replaced with the one filled in
Replace with.
Reset to
default
User can remove all the set up and back to default mode.
SDK
For users following SDK for software porting, the scanned data can also be output
with the format needed.
Demo Area
