7
Dismounting Luna IPx4 ceiling hoist
1)
Make sure the Luna Mover cannot be moved by hand (See 2.2).
2)
Detach the power cable from the Luna.
3)
Press the ceiling hoist upwards against the Luna Mover and turn 90
˚
counter clockwise.
Operating the Luna Mover
1)
Connect the hand control to the Luna ceiling hoist.
2)
Press one of the horizontal buttons (A or B) to
activate the Luna Mover. When a button is released
the Luna Mover stops.
The direction arrows on the Luna Mover
match the horizontal arrows on the hand
control. They indicate which direction the
Mover will move when operated.
2.2
Operation of safety functions
Safety release handle:
In case of a Luna Mover malfunction it will not be able to move. Should a patient be suspended
during a malfunction the safety release handle can be used to unlock the Luna Mover moving
function
–
it can now be moved manually.
Unlocking
1.
Remove the safety release handle.
2.
Use the safety release handle as a key to
unlock/lock the moving function (See Quick guide
for use, page 12).
Note:
The safety release handle can be operated from one
side only. If the reference sticker is visible operate from the
other side.
Locking
1.
Turn the safety release handle 180°.
2.
Remove safety release handle and click back in
place.
Do not place your hand between the Luna Mover and track system when locking
the Mover.
Click the safety release handle back in place after use to avoid driving direction
confusion.
!
!
(A)
(B)
Summary of Contents for Luna Mover
Page 2: ...2...
