5
ENGLISH
SWIFT
Connecting the Airflo Duo - fig.
5
•
Connect the hose (
A
) to the Airflo Duo
compressor.
•
Place the Swift Transfer Slide so it is flat on the
surface with the patient outline facing upwards
and the air valves facing towards the foot end of
the patient.
Note:
Either end of the hose can be
connected to the Airflo Duo, there is not a correct
orientation.
•
The Airflo Duo can be used with either mains
power or battery power. The pump will
automatically switch between mains or battery
power.
•
Position the Airflo Duo compressor so that it will
not be in the way during the transfer. The Airflo
Duo can be hooked onto the foot of the bed
using the bed hooks on the back of the pump.
(fig.6)
Switching the Airflo Duo ‘On’ & ‘Off’ - fig.
7
•
To switch on, press the ‘Power’ button (
A
fig.7).
The battery state indicator (
B
fig.7) will show the
battery capacity at the start of operation.
•
To switch off, press and hold the ‘Power’ button
for 2 seconds. The indicator lights will go out.
6
5
A
7
A
B
