6
3.2. Assembling of the siderails A647-00/A648-00 A649-00/A650-00 A651-00/A652-00
Fixing jaw on the bed if it is not already installed, for this :
1
1
2
3
n°4
1 Remove the cap of the siderail by pushing inside or outside (depending on the assembly) then remove
it with a screwdriver if necessary.
2 Clip the jaw in the slots provided for this purpose, by positioning the nut on the inner side of the bed.
3 Screw the jaw with the screw and nut provided with an Allen wrench n°4.
Insert pole of the side rail in the jaw on the head side fixed on the bed until to hear the «CLIC»
Block the jaw on feet side through the clamping rondo and ensure its blocking.
To remove the siderail, loosen the rondo on the feet side then disengage the pole without removing it
by pulling the index finger on the side of the head side jaw . Take the side rail with one hand at each end
to remove it completely.
Feet side
Head side
4
4
5
5
5
4
Summary of Contents for SAM Ergonom A618-00
Page 12: ...12...
