9-1
5 - DASH / AUT
O
SECTION 9 – FURNITURE AND SOFTGOODS
LOUNGE CHAIR BASE CLAMP
While the vehicle is in motion, the base of the
lounge chair must be fastened into position with
a clamp on the floor as shown.
When the vehicle is parked, you can unscrew
the knob and remove the clamp to position the
chair away from the wall.
TABLE AND CHAIRS
–If Equipped
Dinette Chairs
The dinette chairs are free-standing to allow
greater freedom of movement than typical booth
style dinettes or pedestal seats. Folding dinette
chairs are also provided for additional seating
when needed. The folding chairs are typically
stored in the bedroom wardrobe or under the bed.
Free-standing chairs are not intended for
occupancy while the vehicle is in motion.
Before driving, always return chairs to their
storage location.
Dining Table Chairs
1. Push Dining Table chairs against opposite
sides of table.
2. Bind Chairs together with the provided strap
in the figure eight pattern shown above.
CAUTION
The chair must be clamped back into
place and the glide mechanism locked (if
equipped) before traveling.
Typical chair base clamp – yours may differ in appearance.
