9-7
SECTION 9 –
FURNITURE AND SOFTGOODS
Tip for “power users”
•
If you have the footrest section unlatched and
positioned against the seat cushion, it will
move out with the lounge when you press the
recline switch.
•
When you return to upright position, you can
hook your heels over the front edge of the
footrest section and pull it back with you.
•
Then, when you want to get up, simply push
the footrest section forward with your feet to
provide a gap for you to exit.
To Convert to Bed
1. Extend footrest section and push together with
lounge seat cushion.
2. Press recline button until entire lounge lies
flat.
3. Reverse steps to return to lounge seating.
SLEEP NUMBER
®
BED
by Select Comfort
™
–If Equipped
NOTICE
Do not recline the lounge completely flat
unless the footrest trundle section is
extended. Do not occupy the lounge
when elevating the seat back from the flat
bed position to upright lounge position. If
house battery voltage is low, the
mechanism may require assistance by
lifting the seat back while returning
upright from flat bed position.
WARNING
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.
(1) Display
Indicator
(2) Adjust to
Firmer Setting
(3-4) L and R
represent the
left and right
side of mattress
(5) Adjust to
Softer Setting
(6) Memory
feature allows
instant return
to your favorite
sleep number
(7) Full-Fill
Feature for a
freshly made
look
Wireless Sleep Number Remote Control
• A 9-volt battery is used in the wireless
remote and should last approximately 6
months under normal use. Replace the
battery when the low battery indicator is
displayed.
