4-11
SECTION 4 –
APPLIANCES AND SYSTEMS
changing the temperature setpoint. A few
seconds after you release the temperature selector
button, the display will return to showing the
current room temperature.
Cooling (A/C)
•
Slide the thermostat switch to Cool position.
•
Slide the Fan Mode and Fan Speed Switches
to the desired positions.
On/Low:
A/C compressor cycles on and off
with the thermostat while fan runs
continuously at low speed.
On/High:
A/C compressor cycles on and off
with the thermostat while fan runs
continuously at high speed.
Auto/Low:
Fan runs at low speed and cycles
on and off with the A/C compressor as
controlled by the thermostat.
Auto/High:
Fan runs at high speed and
cycles on and off with the A/C compressor as
controlled by the thermostat.
•
Adjust the temperature setpoint to personal
preference if needed. See “Changing
Temperature Setpoints”.
To Run Fan Only (No Heat or Air)
•
Set Thermostat switch to OFF.
•
Slide Fan Mode switch to On.
•
Place Fan Speed switch to Lo or Hi as desired
•
The fan will run continuously at the selected
speed and is not controlled by thermostat
setting. The display will show current room
temperature.
