SECTION 5
DASH / AUTO
5-2
To Activate the Grade Brake
•
Press the Grade Brake switch on the left side
of the dash to activate the feature.
•
A green icon (shown below) will appear on
the instrument cluster when the grade brake
system is active.
•
Press and release the brake pedal once - the
grade brake will downshift the transmission
a gear to help control the vehicle speed
•
Press the accelerator to reset the transmis-
sion to shift normally until the next time you
press the brake pedal
•
Turn the Grade Brake system off when not
on steep or long downhill grades.
The grade brake has a built-in, self protection
feature that will not allow the transmission to
downshift at high speeds which could damage the
transmission or engine if downshifted.
HAZARD WARNING LIGHTS
See operating guide for operating information
and location of hazard flasher switch.
FUEL PUMP SHUT-OFF SWITCH
(Ford Chassis Only)
Vehicles built on Ford chassis are equipped
with an inertial type switch that shuts off the fuel
pump in the event of collision. This switch must
be manually reset to resume the fuel supply to the
engine.
See your Ford chassis operating guide for lo-
cation and reset procedures for this switch.
NOTE: It is possible to accidentally trigger the
fuel pump shut-off switch by abruptly
striking an object such as a curb or park-
ing block. If your vehicle exhibits symp-
toms of running out of fuel immediately
after such an occurrence, the fuel pump
shut-off switch may need to be reset.
Consult your chassis operating guide for
additional information.
MULTI-FUNCTION SIGNAL
LEVER
The multi-function signal lever controls the
turn signals, high/low beam changing, wind-
shield washer, wipers and wiper delay, and the
electronic speed control (cruise) on some models.
See your chassis operating guide for complete
operating information.
HEADLIGHT BEAM CHANGE AND
TURN SIGNALS
Move multi-function lever upward for right
turn signal and downward for left turn signal.
Pull end of handle toward you to switch high
beam to low, or low beam to high.
WINDSHIELD WIPERS AND
WIPER DELAY
See your chassis operating guide for complete
operating information.
CRUISE CONTROL
The electronic speed control (cruise) allows
you to maintain a steady speed and relieve driv-
ing strain while traveling long distances.
Grade Brake Symbol