9-9
SECTION 9 –
FURNITURE AND SOFTGOODS
DIGITAL SLEEP AIR BED
by Innomax
®
–If Equipped
The air bed operates on 120-volt AC
household current only, so you must have the
shoreline plugged in, the generator running, or
inverter power (if equipped) to adjust the air
pressure settings in this bed.
If loss of power occurs, the memory setting
will default to the pre-set threshold and re-
programming the memory setting will be
necessary.
NOTE: If your bed is equipped with the power
lift feature, it is recommended to deflate
the air mattress to 25 or below when
elevating the bed into the fully upright
position. This will help prolong the life of
your air mattress.
Basic Operation
1. Push “Bed Fill” once to fill air chamber.
2. Push “Soft” for comfort level.
3. When comfortable, push “Memory” button
and hold until desired set point preference
appears. Memory is now set.
4. When awake push “Bed Fill” once for Bed
Ready.
5. When in sleep system push “Memory” twice
for desired sleep mode.
Further Information
For complete operating instructions and
cautions, see the Innomax air bed user guide
included in your InfoCase.
BED – POWER LIFT
–If Equipped
(Typical View – Your coach may differ in
appearance)
Your coach may be equipped with a power
lift/lower mechanism that raises and lowers the
head of your bed with a touch of a switch to best
suit your comfort needs.
The Power Lift/Lower Control switch is
located on overhead cabinet above bed.
•
Press the control switch UP to raise the head
of the bed.
•
Press the control switch DOWN to lower the
head of the bed.
• Display
Indicator
• Adjust to
Firmer
Setting
• Adjust to
Softer
Setting
• Bed-Fill feature
for a freshly
made look
Air Bed Remote Control
-Typical View
• Memory feature allows
instant return to your
favorite sleep number
Power Lift/Lower Control Switch
(Located on overhead cabinet above bed)
-Typical View
The switch will illuminate blue when the switch
is on. White illumination indicates the
switch is off.
