SECTION 11 –
MAINTENANCE AND STORAGE
11-10
•
Do not use wool, abrasive brushes, or tools
that have previously cleaned other metals,
because as well as scratching the surface, they
can generate contamination and unattractive
stains.
•
Do not use silver cleaners.
SINK – STAINLESS STEEL
Care and Cleaning Instructions
The stainless steel sink can usually be cleaned
with water and soap or detergent using a soft
cloth or sponge.
•
Rinse thoroughly
with warm water and wipe
dry quickly to avoid spots and streaks.
•
For stubborn stains,
use a mild abrasive
cleanser like Soft Scrub
®
, Comet
®
, etc. Work
in the direction of the “grain” of the brushed
finish lines.
•
Never use steel wool.
Particles of steel from
the wool pad can embed into the sink surface,
then become rusty and unsightly.
•
Avoid contact with full-strength
bleaches,
household chemicals, and acid-based
cleaners. If this happens, rinse and wipe dry
quickly.
•
Salt, mustard, and mayonnaise
can cause
pitting if left on the steel sink surface. If
spilled, clean and rinse immediately.
•
A high iron content
in the water (hard water)
may result in a brown or rust-colored stained
appearance. If noticed, dry towel sink after
each use.
•
Do not use rubber mats
in the sink bowl.
Material trapped under mats can complicate
cleaning.
NOTE: Improper use may damage this product
and void the warranty.
RANGE AND REFRIGERATOR
For care and appearance maintenance of the
range and refrigerator, refer to the appliance
manufacturer’s operation and maintenance
manuals included in your InfoCase.
CERAMIC TILE – POLISHED
Care and Maintenance
You can easily maintain the beauty of your
polished ceramic tile flooring with little effort, by
routinely cleaning with an everyday cleaner, such
as Aqua Mix
®
biodegradable concentrated stone
and tile cleaner.
When used regularly, this neutral cleaner
prevents soap scum and hard water deposits,
along with leaving your coach smelling fresh and
clean.
NOTE: Before use, test a small area according
to the application instructions. Read
entire label before using.
•
Sweep, vacuum, or dust surface.
•
Apply solution to surface with mop or sponge
(see Aqua Mix label for concentration to
water parts recommended).
•
Allow solution to dwell 1 to 2 minutes.
•
Agitate with a natural-bristle brush or white
nylon scrub pad. Do not allow solution to dry
on surface.
•
Mop up dirty solution.
BATHROOM
Toilet
For instructions on the care of your toilet, refer
to the information in your InfoCase.
Tub and Shower Walls – Fiberglass
–If Equipped
The tub and shower walls in the bathroom
should be cleaned with mild soap and warm
water. Do not use an abrasive cleaner on the tub
and shower walls, as scratching and discoloration
may occur. Stubborn stains may be removed with
an automotive-type cleanser.
After cleaning, you can return the soft glow to
your tub and shower walls by applying a light
application of an automotive-type wax.