9-5
SECTION 9 –
FURNITURE AND SOFTGOODS
Once the table is reattached to the table leg
tube, tighten the handle completely then back off
approximately 1/2 turn. Periodically repeat this
adjustment procedure to ensure that it is properly
adjusted.
DINETTE/BED CONVERSION
–If Equipped
(Typical View – Your coach may differ in
appearance)
Dinette to Bed
1. Remove both dinette back cushions and set
aside.
2. Lift both dinette seat cushions upward.
3. Release the table leg from the floor support
bracket.
4. Release the catch on the table leg brace and
fold the leg up against the bottom of the table.
5. Remove the table from the wall support
bracket by lifting the end of the table.
Floor
Support
Bracket
Table Leg
Catch
Table
Bracket
Wall
Support