4-3
SECTION 4 –
APPLIANCES AND SYSTEMS
ONEPLACE
®
SYSTEMS
MONITOR PANEL
The OnePlace Systems Monitor Panel
provides a convenient, central location for
checking the condition of all utility systems in
your motorhome.
At the touch of a button, the monitor panel
will display the fresh water and holding tank
levels, propane gas tank level, plus the chassis
battery and house battery condition. You can start
the generator and check the generator hourmeter
or turn on the water pump.
Generator Start/Stop Switches and
Hourmeter
See
Section 6 - Electrical
for generator start-
up/shut-down and generator hourmeter
instructions.
Water And Holding Tank Levels
Press the Tank Levels switch to show
approximate levels on the LCD screen.
The approximate fluid levels are measured by
electronic sensors on the sides of the tanks. Tank
levels are displayed as 1/3, 2/3, and Full (F).
There is generally more fluid in a tank than
indicated on the monitor panel.
Tank Capacities
See “Tank Capacities” in
Section 1 -
Introduction
.
Propane Gas Level
Press the Tank Levels switch to show
approximate propane tank level.
The propane level is registered by a sending
unit on the tank. The gauge mounted on the side
of the tank will give a more accurate indication of
actual tank level if needed.
NOTICE
Do not store items in oven.
If oven would turn on stored items can
ignite resulting in fire and or property
damage.
Gen
Start
Gen
Stop
Gen
Hourmeter
Typical - Your motorhome may or may
not be equipped with all of the features
shown.
Tank Levels Switch
Water Tank
-Typical View
Sensors
