A1-VT154B- -G
Reminders :
SERVER
Two people are needed for assembly.
Use only hardware supplied.
Do not over tighten bolts.
This item may require periodic tightening.
MADE IN MALAYSIA
Page 2 of 2
HARDWARE PART :
STEP 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
IMPORTANT NOTE :
~ Please keep all hardware out of the reach of
children.
Assembly is now Completed.
Shelf Pin Supporter
16pcs
Insert support leg to the bottom of the sideboad as shown on Fig1. Insert the
shelf pin supporter into the server and place glass shelf on them as shown on Fig.1
ASSEMBLY :
STEP 1
Glass Shelf
Adjust the levelers to level the unit.
Adjust the levelers to level the unit.
Leveler
FRONT ONLY
Leveler
