WINNERS ONLY
ASSEMBLY INSTRUCTIONS
Page 1 of 1
WARNING: Before the removal or installation of charging kit disconnect charging kit from any electrical outlets.
Fig.1
STEP 2: Attach charging kit on the desired headboard leg
using 2 screws and phillips screwdriver as shown in Fig. 3.
Step 1: Using a phillips screwdriver remove the 2 screws
attaching the charging kit to headboard leg as shown in Fig.1.
BTB/BTG/BTH/BTP1001F
BTB/BTG/BTH/BTP1001T
Charging Kit Removal And Installation.
Note:
The Manufacturing label should not be visible
once charging kit is installed as shown in Fig. 2.
Fig. 3
Fig.2.
R
