Place [Return Pedestal] (J) on
a flat surface, Using 3
machine screws (5), secure
[Return Back Panel] (K) to the
back of [Return Pedestal] (J).
J
J
K
Using 3 machine screws (5), attach [Return Small
Panel] (L) to [Return Back Panel] (K). Do not tighten the
machine screws yet.
K
J
L
L
M
J
K
Insert [Return Keyboard Support] (M) into the square
holes on (L) and (J). Fasten (M) using 2 [Pan Head
Wood Screws] (6).
Extend the keyboard metal glides. Insert [Return Key-
board Tray] (N) into the metal glides.
N
Place Main Desk and Return side by side. Secure the
two together using 1 [Long Machine Screw] (7) and 3
[Machine Screw] (5), through the holes indicated by
arrows below. Insert [Main Drawer] (H) into the metal
glides found on the sides of (A) and (F).
(5) x 3
(7)
A
F
L
E
