background image

PAGE 1 OF 3

MADE IN MALAYSIA

ABR-20302-SCMWU

  DRT245824

PROD . NO:

WINNERS ONLY

HARDWARE LIST:

Pan Head Screw

Glue

8pcs

Flat Washer

Allen Key

Lock Washer

JCBC Bolt

8 x 1 1/4”

10g

M6 x 70mm

M6 x 13mm

M6.5 x 16.5mm

M4 x 2.1/2”

8 pcs

8 pcs

8 pcs

1pce

1pce

1

2

3

4

5

6

This product will take 15-20
     minutes to assemble.

Screw driver is require for assembly (not included)

TIP:store the Allen key and or Wrench used in assembly

                     in this product’s drawer or use masking or painter’s tape
                     to affix it to the underside of the product .this will make it 
                     easier to find if you want to periodically tighten bolts or
                     disassemble the product.

Cushion Seat

Front Leg ( Left )

Front Leg (Right )

Short Stretcher 

Long Stretcher 

 NO

COMPONENT LIST:

SKETCH

DESCRIPTION

QTY

1 pce

2 pcs

2 pcs

2 pcs

2 pcs

Hardware Bag

1pack

A

B

C

D

F

E

 NO

SKETCH

SIZE

DESCRIPTION

QTY

Thank you for purchasing this quality product. Please read the instructions thoroughly before unpacking the 
assembly parts.
Caution: Sharp exposed staple tips can cause injury, therefore for your protection, please remove
any exposed staples used in packing.
Please keep all hardware parts out of the reach of children.
1.We recommend that you should assemble this product with the assistance of another person: this will make the
 assembly easier,and will help to prevent personal injury and to insure parts are not damaged during the 
 assembly process.
2.Before beginning,please check the packing materials carefully for small parts which may have come loose 
  inside the carton during shipping. Please do not discard any packing material until all parts have been located.
  If any parts are missing, please contact your dealer for prompt replacement.
3.To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residues 
   and rough surfaces and also check for staples or nails left after removing the packing materials. The manufacturer
   will not be held responsible if preventive steps are not taken prior to installation.
4. Please do not over tighten screws or bolts. During normal use everyday,screws,bolts,nuts and wooden plugs 
   may loosen up. They should be periodically inspected and re-tightened to prevent damage to the furniture 
   and (or) personal property of cause injury. Always check to be sure all harware on this list and the below 
   mentioned components are attached to the furniture properly and kept tightened.
5.Please lay all parts and hardware on a non abrasive surface such as a carpet,and follow the assembly.

Reviews: