ABR-20302-SCMWU
2.
Put the Cushion Seat on a soft surface such as a carpet. Place the legs to corner block of the frame, by using provided hardware.
As shown in Fig.2
2.1.
Insert Pan Head Screw into stretcher through the pre-drilled holes, tighten with screw-driver (Not Provided).As shown in Fig.2.1.
PAGE 3 OF 3
MADE IN MALAYSIA
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
STEP 2
DRT245824
SADDLE BARSTOOL
WINNERS ONLY
ASSEMBLY :
3.1
- Turn the Barstool to standing position.
3.2
-
STEP 3
Check it's balance and tighten all screw and bolts to complete the assembly.
B
E
F
1
2
4
5
3
Fig 2
Fig 2.1
Assembly is now Completed.
