Notes: Need two people to assemble.
Instructions:
Chart 1
Step 1.
Align the L-Shaped RHS panel (H) to
RSF&LSF side panel (F), insert and
tighten with
1-1/4" machine bolts
(3PCS).
Chart 3
Step 3. Align the R1B pedestal (A) & RSF&LSF side panel (F) to the back panel (E),
insert and tighten with
1-1/4" machine bolts
(6PCS).
Step 4. Using a mallet,carefully insert center crossbar (G) to the R1B pedestal (A) and
RHS glide panel (D), tighten
(1-1/4") flat head wood screws
(2 PCS).
Step 5. Hammer the
wood dowels
(4 PCS) on the R1B pedestal (A) & RSH&LSF side
panel
(F)
.
Step 6. Loosen the screw to adjust
metal figure 8
(8 PCS) of its direction of the panel and
re-screw.
Chart 2
Step 2. Align the RHS glide panel (D) to the
RSF&LSF side panel (F) and the
L-Shaped RHS panel (H) to the RHS side
panel (D), insert and tighten with
1-1/4" machine bolts
(4PCS).
3
X8
X4
3
3
