Chart 5
Step 9. Hammer the
wood dowels
(3 PCS) on the R2B pedestal (J) & L-Shaped RHS
panel (H).
Step 10. Loosen the screw to adjust
metal figure 8
(7 PCS) of its direction of the panel and
re-screw.
Step 11. Assemble the Return Desk to the Main Desk by inserting and tightening
1-1/4"
machine bolt
(4PCS) at the front and the rear side of the L-Shaped RHS panel (H).
Chart 4
Step 7. Align the R2B pedestal (J) &
L-Shaped LHS panel (M)
to the back panel (N),
insert and tighten with
1-1/4" machine bolts
(6PCS).
Step 8. Using a mallet, carefully insert Cross Bar (L) to the L-shape LHS panel (M) and
R2B pedestal (J), tighten with
1-1/4" flat head wood screws
(2 PCS).
8
X7
X3
8
