5
5
5
5
6
6
6
3
4
7
8
1-1/4"
7
8
9
8
7
3
2
X4
X4
X12
X12
X3
X2
X1
Chart 3
Step 3. Use 1-1/4" machine bolts (4PCS) to connect RHS glide panel (D) to L-shaped RHS
panel (I) and back panel (E).
Step 4. Using a Mallet, carefully insert Cross Bar (H) to the R1B pedestal (A) and RHS glide
panel (D), tighten with 1-1/4" flat head wood screws (2 PCS) to Cross Bar (H) from
R1B pedestal (A) side and from RHS glide panel (D) side.
Step 5. Hammer the
wood dowels
(4 PCS) on the R1B pedestal (A) and RSF side panel (G).
Step 6. Loosen the screw to adjust
metal figure 8
(12 PCS) of its direction of the panel and
re-screw.
H
D
I
G
Chart 4
Step 7. Insert
short (1") flat head wood screws
(12 PCS) through metal figure 8 to connect
R1 desk top (B) and base.
Step 8. Use 1-1/4" machine bolts (3 PCS) and (1-1/4") flat head wood screws (2pcs) to
connect the RHS glide panel (D) and R1 desk top (B).
Step 9. Use
long(1-1/4")flat head wood screws
(2 PCS)
to connect Cross Bar (H) to R1
desk top (B).
Main Desk completely assembled
D
H
D
4
X1
3
Remove strap
8
X2
4
Summary of Contents for GC266R
Page 1: ......
