Chart 4
Step 7. Hammer the
wood dowels
(2 PCS) on the R2B pedestal (J).
Step 8. Loosen the screw to adjust
metal figure 8
(6 PCS) of its direction of the panel and
re-screw.
Step 9. Align the Main Desk to the Return Desk by inserting and Fastening
1-1/4" machine
bolt
(4PCS) at the front and the rear side of the L-Shaped LHS panel (H).
Chart 3
Step 5. Align the R2B pedestal (J) &
L-Shaped RHS pane
l (N) to the back panel (M),
and fasten with
1-1/4" machine bolts
(6PCS).
Step 6. Using a mallet, carefully insert Cross Bar (K) to the L-shape RHS panel (N) and
R2B pedestal (J), fasten with
1-1/4" flat head wood screws
(2 PCS).
X6
X2
