SOLID TOP BUTTERFLY EXTENSION PEDESTAL TABLE
T1-VG4296
TBSR-10368BC-CNNN
MADE IN MALAYSIA
PAGE 2 OF 3
STEP 2
NOTE :
THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE.
ASSEMBLY
STEP 1
Hex Nut
5/16"
5/16"
22 pcs
5/16"
Lock Washer
22 pcs
Flat Washer
22 pcs
Wrench
1 pce
HARDWARE PART :
Turn both pedestals upside down. Attach legs by
inserting hanger bolts through pre-drilled holes on
the pedestal. Put a Flat Washers, Lock Washers
and Hex Nuts onto the hanger bolts then tighten
Hex Nut using the Wrench. Attach leg stretcher by
inserting hanger bolt through pre-drilled holes on
pedestal, put a Flat Washers, Lock Washers and
Hex Nuts onto the hanger bolt, then tighten
Hex Nuts using the Wrench.
Position the table top upside down on a smooth, protective surface
such as carpet. Remove and discard the temporary wood strip.
STEP 3
Unlock the hooks underneath the table and pull the table top wide open equally from bolt ends. Align and attach the table top to the
pedestal. Insert a Flat Washer, a Lock Washer and Hex Nut onto the hanger bolt. Tighten all Hex Nut with the Wrench
provided.
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
Wrench
Hex Nut
Lock Washer
Flat Washer
Leg
Pedestal
Level Glide
Leg Stretcher
Remove Wood Strip
Table Top
Unlock Hook
Wrench
Hex Nut
Lock Washer
Flat Washer
