57
4. Click
Advanced Options
from the Video Inputs tab.
The dialog box in Figure 3.15 allows you to enable certain options
for a better video quality.
Figure 3.15: Advanced Options Interface
Videum Configure
Figure 3.14: More parameters interface
Settings selected in Step #1 and 2 are applied to all the boards on your
system.
3. Click
More
to set the video parameters
This window as shown in Figure 3.14 allows you to modify the
settings such as brightness, contrast, saturation and hue.
Hue: this control is only used for NTSC cameras. For PAL it should
stay at the default setting of 50. Press the
Default
button, to reset
the value to 50. For NTSC cameras: set
Hue
to get the most realistic
color representation.
Select the video equipment you are using by checking “camera” or
“VCR”