WiNRADiO G315 VHF/UHF Receiver
64
The
Averaging
button enables
trace averaging
. With trace averaging
enabled, the displayed trace is not the actual currently swept trace, but rather
an average of the currently swept trace and the previous trace:
There are also three zoom-related buttons:
The first button centers the zooming action around the marker (if the marker
position has been set) - if this button is disabled then zooming will be done
with respect to the center of the screen. The next two buttons perform the
actual zooming in and out functions.
Spectrum sweeps can be opened and saved using file manipulation buttons:
To hide the spectrum sweep window, use the yellow X button at bottom right:
The larger of the two versions of the spectrum sweep window also contains
basic controls of the receiver, which are self-explanatory:
The only additional feature is the
Tune to marker
button. This is a momentary
button which tunes the receiver to the current marker frequency, if the marker
is enabled:
These controls are the same for all three spectrum sweeping functions.
