WiNRADiO G315 User’s Manual
93
You can also copy the desktop icon, creating one with the command-line
switch, and one without, and renaming the icons to reflect the associated
functional differences.
Note: The entire file path name of the Target is enclosed in double quotes, but
not the command-line switch (otherwise it would be considered to be part of
the executable file name).
Reference Oscillator Output Option (G315/RO)
The “RO” option, available only for the G315i model, can be used to output the
internal reference frequency. This is useful for situations when the receiver's
internal oscillator is to be used as a reference for other equipment. If an
external reference is used, this can be provided to other receivers in a daisy-
chain arrangement.
If the receiver relies on its internal reference oscillator, this option will provide
16.384 MHz reference output. If an external oscillator is used, then the
external oscillator frequency will be provided at this output.
The output is a DC-coupled sine wave at CMOS compatible output levels
(approx. 0.6 to 4V), impedance 150 ohm.
Intermediate Frequency 109.65 MHz Output Option (G315/IF0)
The “IF0” option, available only for the G315i model, provides a wide-band
output at the 109.65 MHz first intermediate frequency. This is useful for a real-
time spectrum display, wider than the 20 kHz wide spectrum display provided
in the G315 receiver.
Intermediate Frequency 10.7 MHz Output Option (G315/IF1)
Similar to the previous option, the “IF1” option provides a wide-band IF output.
The difference is that this option involves an additional down-converter which
converts the 109.65 MHz IF down to 10.7 MHz. This option is available only for
G315i receiver.
