EPX-C414/Configuration
v1.0
www.winsystems.com
Page 36
7.10.19 LAN Ethernet Port
Layout and Pin Reference
Additional Information
The EPX-C414 is equipped with two Intel i210 Gigabit Ethernet controllers. Each of
these provides a standard IEEE 802.3 Ethernet interface for 1000/100/10BASE-T
networks. The connections for each Ethernet port are available at LAN. WinSystems
offers CBL-ENET2-002-12, to interface with two RJ-45 jacks.
On-board Ethernet activity LEDs LED5 - LED7 are provided for Port 1. LEDs LED8 -
LED10 are associated with Port 2. These activity signals are also available off-board for
enclosures or other applications that have remote mounting requirements. The activity
signals for Port 1 are provided at connector LED1. The signals for Port 2 are provided at
LED2. (See the LED tables for signal and pin definitions.) Three on-board LEDs are
provided to give Ethernet channel status. Refer to “LED1, LED2 Ethernet LEDs” on
Connector
MOLEX 502046-2070 (LAN)
Matching Connectors
•
MOLEX 503110-2000 (housing)
•
MOLEX 501930-1100 (crimp)
WinSystems offers the CBL-ENET2-002-12 cable to simplify this connection.
Pin
Name
Pin
Name
1
(G1) MX1+
2
(G1) MX1-
3
(G1) MX2+
4
(G1) MX2-
5
(G1) MX3+
6
(G1) MX3-
7
(G1) MX4+
8
(G1) MX4-
9
GND
10
GND
11
(G2) MX1+
12
(G2) MX1-
13
(G2) MX2+
14
(G2) MX2-
15
(G2) MX3+
16
(G2) MX3-
17
(G2) MX4+
18
(G2) MX4-
19
GND
20
GND
1
2
20
CBL-ENET2-002-12
