background image

ITX-P-3800/General Operation

v1.0

www.winsystems.com

Page 9

The ITX-P-3800 features the Intel Atom (Bay Trail) dual core or quad core 

system on chip (SOC). Its robust design, small size, and extended operational 

temperature make it ideal for use in industrial IoT applications and embedded systems 

for industrial controls, transportation, Mil/COTS, and energy markets. 

The soldered down memory provided enables up to 4 GB of DDR3L RAM. SATA support 

is provided along with mSATA support through the full and half-size Mini Card slots.

The VGA and LVDS display interfaces support simultaneous video output. There are a 

total of four USB 2.0 ports and one USB 3.1 Gen 1 connector which supports an 

additional USB 2.0 port. There are four RS232 serial channels.

There are four hardware digital inputs and four hardware digital outputs. The digital 

inputs have a 10 k

Ω

 pull up resistor to +5V by default.

Other features include beep tones for error notification, a watchdog timer supported 

RTC with optional battery back up, and audio amplifier.

The SBC is software-compatible with Windows 10, Windows 10 IoT Enterprise, 

Windows 10 IoT Core, Linux, and some real-time operating systems.

Drivers are available from the WinSystems website.

Summary of Contents for ITX-P-3800



















































Reviews:

Related manuals for ITX-P-3800