background image

110912   

 

 

 

 

PRODUCT MANUAL PPC65 

 

 

 

 

6

BEFORE YOU BEGIN

WinSystems offers best practice recommendations for using and handling WinSystems embedded PCs.  These methods 
include valuable advice to provide an optimal user experience and to prevent damage to yourself and/or the product.

YOU MAY VOID YOUR WARRANTY AND/OR DAMAGE AN EMBEDDED PC BY FAILING TO COMPLY WITH THESE 
BEST PRACTICES.

Reference 

Appendix - 

A

 for 

Best Practices

.

For any questions you may have on WinSystems products, contact our Technical Support Group at (817) 274-755, Monday 
through Friday, between 8 AM and 5 PM Central Standard Time (CST).

Please review these guidelines carefully and follow them to ensure 
you are successfully using your embedded PC.

This product ships with a heat sink.  Product warranty is void if the 
heat sink is removed from the product.  

FCC CLASS B

The PPC65 Panel PC series has been fully tested and is compliant with the technical standards of FCC Part 15 Class B 
(DoC); IC ICES-00 and CE EMC Directive 2004/108/EC (EN55022 / EN55024).

These limits regulate the digital device to provide proper protection from harmful emission interference when it is under 
operation in a residential, hospital or working environment.  Digital device compliance with Class B generates less noise 
and lower radio frequency emission in order to not affect the health of the human body and not to interfere with other 
equipment, devices or machines operated nearby as seriously as those units with Class A only. 

Summary of Contents for PPC65-1210S
















































































Reviews: