101019
OPERATIONS MANUAL PPM-LX800-G
24
C. Peripheral Device, PCI, USB, and PC-104 Buses
>
C. Graphics
Internal Controller Mode:
Secondary Controller
Options:
Secondary Controller
Disabled
Primary Controller
Graphics Memory:
24
Driver Controls Init:
Disabled
Options:
{
Enter any value between 2-254 for graphics memory size.
}
Options:
Enabled
Disabled
Output Display:
CRT
DOTPLL Bypass:
Disabled
Options:
CRT
Flat Panel
Panel and CRT
Auto
Options:
Disabled
Enabled
Flat Panel Configuration
(All properties and options are disabled by default due to Output Display set to CRT.)
Type:
TFT
Options:
TFT
LVDS
Auto
Resolution:
800x600
HSYNC Polarity:
Active Low
Options:
800x600
1024x768
1152x864
1280x1024
1600x1200
320x240
640x480
Options:
Active Low
Active High
Data Bus Type:
9-24 bits, 1 ppc
VSYNC Polarity:
Active Low
Options:
9-24 bits, 1 ppc
18,24 bits, 2 ppc
Options:
Active Low
Active High
Refresh Rate:
60 Hz
LP Active Period:
Free Running
Options:
60 Hz
70 Hz
72 Hz
75 Hz
85 Hz
90 Hz
100 Hz
Options:
Free Running
Active Only
SHFCLK Active Period:
Free Running
Options:
Free Running
Active Only
Software Backlight Control
(All properties and options are disabled by default due to Output Display set to CRT.)
Backlight Enable:
Enabled
Initial Brightness:
Last Value
Options:
Enabled
Disabled
Options:
Last Value
0% (Off)
10%
20%
30%
40%
50%
60%
70%
80%
90%
100% (Full On)
Note: Defaults are indicated in
bold
for BIOS properties. Default options that cannot be user-modified are indicated with
grey
text.
