background image

 

Limitation of liability 

This  publication  is provided  ―as  is‖  without  warranty  of  any  kind,  either  express  or  implied,  including  but  not 

limited to, the implied warranties of merchantability, fitness for any particular purpose, or non-infringement of the 

third party‘s right. 

This  publication  could  include  technical  inaccuracies  or  typographical  errors.  Changes  are  added  to  the 

information herein, at any time, for the improvements of this publication and/or the corresponding product(s). 

 

Disclaimer of warranty 

In  no  event  shall  our  company  be  liable  to  any  party  or  any  person,  except  for  replacement  or  reasonable 

maintenance of the product, for the cases, including but not limited to below: 

(1)  Any  damage  and  loss,  including  without  limitation,  direct  or  indirect,  special,  consequential  or  exemplary, 

arising out of or relating to the product; 

(2) Personal injury or any damage caused by inappropriate use or negligent operation of the user; 

(3) Unauthorized disassemble, repair or modification of the product by the user; 

(4)  Any  problem,  consequential  inconvenience,  or  loss  or  damage,  arising  out  of  the  system  combined  by  the 

devices of third party. 

(5) Any claim or action for damages, brought by any person or organization begin a photogenic subject, due to 

violation of privacy with the result of that surveillance-camera‘s picture, including saved data, for some reason, 

becomes public or is used for the purpose other than surveillance. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for DVR600 series





















































Reviews: