Fig2
4
1. Power LED indicator
2. Power switch: ON/OFF
3. Channel display
4-6.
A/V input LED indicator: A/B/C
7. MOD select key, use to select A/V input (A/B/C) for setup
8.9. Channel up/down key
10.
Connect to UHF input of a TV set or cable converter
11.
RF output level control
12-17. A/V input: A, B or C
18. Power input socket
3. System Control
3-1 Power Supply
1. Plug in the DC power plug to the power input socket of the device.
2. Turn on the power switch, and then the power LED indicator will light.
3-2 Output select and channel select
1. Press MOD key to select A/V input (A, B or C) and the corresponding A/V
input LED indicator will light. And, the current setup channel number will be
shown on the channel display.
2. Use up and down key to select the desired channel number. (
The last
selected channel number will be remained, even when powered off.
)
3. Press both
up and down
key at the same time for about 3 seconds. The
number of sound carrier will be displayed on the channel display. Press up
or down key, you can select the TV norm (PAL-G: 5.5, PAL-I: 6.0, PAL-K:
6.5, NTSC: 4.5), then press MOD key to ensure your selection.
5
4. Installation of System
