Fig3
1. Connect video input A to your video device source with RCA plug to RCA
plug video cable and connect audio phone input to your video source with
3.5mm stereo plug to 2RCA plug audio cable. For A/V input B/C connection,
follow the same procedure above.
NOTE: Three pieces of audio cables are included in RFMX3 for audio
connection, three pieces of video cables for video connection.
6
2. Connect RF out to UHF input of TV set or cable set-top converter with RF
cable which is not included.
3. Plug in the provided power supply and plug the plug into the power socket
of the device. Turn on the power switch, and then the power LED indicator
will light.
Then, you can enjoy your TV program.
4. For the best TV vision, it is necessary that the higher or lower channel
number is skipped between A/V input A, B or C. This is to avoid co-channel
interference. For example, Channel 23 is for A/V input A, for A/V input B
channel selection, the channels 22 and 24 must be skipped. For A/V input
C channel selection, it also necessary to follow above procedure to avoid
co-channel interference between A/V input A, B and C.
7
5. Trouble shooting
