17
In this menu, move the cursor to the channel which you want to lock, and press
OK
, the locking mark will be display on the selected channel name. If you want
to cancel the operation, press
OK
key again on the selected channel.
NOTE: Unless you enter the correct password, you can not watch the locked
channel.
3.3 Change PIN
Change pin-code from the submenu
selection ”Change PIN”. Enter the old PIN,
followed by the new PIN, twice. End by
selecting ”
OK
”.
4. System Setting
The settings for video, audio and time can be adjusted in the ”System Setting”
menu. The system timer can also be activated from this menu.
4.1 Video Setup
Display Type:
Select the actual screen ratio of
the TV 16:9 for wide screen-TV and 4:3 for
traditional TV-format.
Video Output:
Select YPbPr or S-Video.
4.2 Advanced Setting
Antenna Power : T
he user can activate the antenna
power for passive antennas (without signal
amplifica-tion).
LCN(LOGICAL CHANNEL NUMBER)
: By pressing
keys, select the option to be ON or OFF. If it is
ON, then all the channels will be listed according to
their logical channel number.
Summary of Contents for STB1SD
Page 9: ...9 6 Remote Control Unit...
