12. RCA cable
13. NiMH AAA size batteries for Headphone (2 pieces)
14. AC/DC adaptor
INSTALLATION
TRANSMITTER
1.
Connect the supplied AC/DC power adaptor to an electrical wall outlet.
2.
Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter. The red
Power/Audio Signal LED starts to flash for around 6 seconds.
2.
The rear of the transmitter has one audio cord that can be connected to audio output jack of TV,
VCR, Hi-Fi, CD/MP3/VCD/DVD players, and iPod.
3.
For TV/VCR/Hi-Fi, switch the ATT to
–8dB. For portable devices, like CD/MP3/VCD/DVD Players,
and IPod, switch the ATT to 0 dB.
Plug the adaptor in the AC source and connect the audio plug to the audio source. Turn on audio
source, then the transmitter will automatically switch on and the Red LED will light up when it receives
an audio signal.
HEADPHONE RECEIVER
1.
To install or replace the rechargeable batteries, carefully rotate the Right-Hand Side
( R )
Ear Pad
anti-clockwise and take it out.
