9
Procedures
Required material:
Kit collector
Item no. 30 000 169
Tool:
no special tool required
Important note:
The machine must be de-installed and put
onto the left side
Note for UC-S
The procedures also apply for the UC-S.
However, it is not required to de-install the
boiler
Observe the safety notes on page 7
Remove the front panel
Pull the suction pipes out of the chemical containers
Put the suction pipes into a measuring cup with water
Successively activate the dosing devices in the actor programme
in order to rinse them with water
Drain the tank
Switch the machine free of voltage
Open the machine door
Remove lower rotating wash field, strainer and filter bottom
Dry tank with a sponge cloth
De-install the machine
Remove the right side panel
Remove the right stiffener wall
Pull off the pressure hoses off the dosing devices
Remove the left stiffener wall together with the dosing devices
Unplug and de-install the drain pump
Remove reinforcing brackets
Completely drain boiler
Summary of Contents for UC-L
