5.3.6
Crosshead and guide shoe
The crosshead guides the piston rod (009,
) and absorbs the lateral forces that come
from the connecting rod (005).
The piston rod (009) is attached to the compression shim (007) and the crosshead pin (006) with
screws. The bearing oil necessary to keep the piston cool, flows through the space (002) to the
piston. The oil from the piston flows back through the oil pipe (001) to the crosshead pin (006).
Then the oil flows into the crankcase.
The guide shoes (004) are attached to the crosshead pin (006) and move up and down on the
guide ways of the column. The guide rails (008) hold the guide shoes (004) and thus the crosshead
in the horizontal position.
Fig 5-20
Crosshead and guide shoe (example)
003
004
007
009
010
006
005
002
001
008
Legend
001
Oil pipe (from piston)
006
Crosshead pin
002
Space
007
Compression shim
003
Top bearing half (top end bearing)
008
Guide rail
004
Guide shoe
009
Piston rod
005
Connecting rod
010
Oil flow (to piston and from piston)
X52
AA00-3326-00AAA-043A-A
Operation Manual
Crosshead and guide shoe
Winterthur Gas & Diesel Ltd.
- 148 -
Issue 002 2018-11
