1.5
Data module codes (procedural data)
This manual is divided into several data modules. Each data module is identified with a unique
data module code, refer to
Table 1-3 - Data module codes (procedural data)
data module codes is as follows:
•
??##-####-##???-###?-? (structure)
•
AA00-5556-00AAA-520A-A (example).
Tab 1-3
Data module codes (procedural data)
Code
Description
Length/type
Property
Example
Alternative versions/designs of items.
Used when two or more items could be
installed in the engine as alternatives for
the same function (eg turbochargers
from different suppliers)
2 alphabetic
characters [A-Z]
sequential,
starts with AA
AA
Applicability related to cylinder number.
00 = applicable to all engines indepen-
dent of the number of cylinders; ## = ap-
plicable only to engines with that specific
number of cylinders.
2 numeric char-
acters [0-9]
arbitrary
00
####
WinGD design group number
4 numeric char-
acters [0-9]
arbitrary
5556
Used for sequential numbering for the
physical breakdown of components; 00
= complete component, 01 = first break-
down; for illustrated parts (tools) it is
used for sequential numbering of data
modules.
2 numeric char-
acters [0-9]
sequential,
starts with 00
00
???
Used for alternative items differing in de-
sign but not enough to change the vari-
ant code (eg AAA = Bearing shell No.1;
AAB = Bearing shell No. 2 to #)
3 alphabetic
characters [A-Z]
sequential,
starts with AAA
AAA
###
Shipdex information code, eg 520 = Re-
move procedure
3 numeric char-
acters [0-9]
Shipdex specif-
ic
520
?
Shipdex information code variant. Used
to differentiate different procedures de-
fined by the same information code for
the same DMC/Hardware section.
1 alphabetic
character [A-Z]
variable
A
X52
AA00-0000-00AAA-018E-A
Operation Manual
Data module codes (procedural data)
Winterthur Gas & Diesel Ltd.
- 26 -
Issue 002 2018-11
