MAINTENANCE
Transmission (Main Gearcase)
Always check and change the transmission oil at the
intervals outlined in the Periodic Maintenance Chart.
Maintain the oil level even with the bottom of the fill
plug hole threads.
Refer to the Gearcase Specifications Chart for
recommended lubricants, capacities.
Oil Check
The fill plug is located on the right side of the
transmission. Access the fill plug from the engine
cover between two seats of the cab.
1. Position the vehicle on a level surface. Remove the fill plug.
2. Check the oil level. Add the recommended oil as needed.
3. Reinstall the fill plug.
Oil Change
The drain plug is located on the back of the transmission. Access the drain plug from the engine cover between
two seats of the cab.
1. Remove the fill plug.
2. Place a drain pan under the transmission drain plug.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug with a new sealing washer.
5. Add the recommended oil.
6. Reinstall the fill plug.
7. Check for leaks. Dispose of used oil properly.
Fill Plug
Drain Plug
Fill Level
Drain Plug
Fill Plug
Drain Plug