SERVICE MANUAL & ICA
8750 AMPHIBIAN/SEAPLANE FLOATS ON CESSNA 208/208B
Revision F
Page 95 of 104
P/N 1005723 Doc. No. W8750-24-01
INSP.
NOTES:
MECHANIC
Lt.
Rt.
FLOAT RE-INS
TALL I
NSTRUCTI
ONS/PROCEDURES (
CONT.)
THIS IS INTENDED AS A
GENERAL GUIDE. EACH INST
ALLATION MAY HAVE
SUBT
LE DIFFERE
NCES. ALWAYS US
E TH
E INSTALLATION DRAWING
S
AS THE
FINAL REFERENCE. ALL WORK SHOULD
BE DO
NE BY CERTIFIED AIRCRAF
T
TECHNICIANS.
(Re-Install from aircraft continued)
21.
P
erform ge
ar check and ensure all lights agree with gear
p
o
sition and gear advisory.
22.
C
ycle time up?
Cy
cle time down?
Check for leakage
23.
H
and pump the gear down and up and check for leakage.
24.
Install springs for steering cables in the tail
of the airc
raft.
25.
R
oute and rig the steering cables and water rudder retra
ct
cables with 30lbs. +/- 5lbs.
26.
Install step struts.
27.
Install brake lines and
bleed for air bubbles
(See Chapter 5 section 5.1 this manual)
.
28.
Install elev
ator down-spring.
29.
Install belly
plate and fairings for main gear.
30.
Install tail i
nspection cover, cowli
ng, and wing gap strips
.
31.
Inflate tires IAW Chapter 1 Figure 1-8 of this manual.
32.
R
emove aircraft from s
tands, check for proper main oleo ext
ension
(see Section 4)
33.
C
heck aircraft placards against the flight manual supplemen
t or install drawing
s for
accuracy.
34.
P
lug nose leg fairing holes, pilot,
and Co-pilot step holes
.
35.
M
ake logbook entry.
