27
–
Data clear Success/Fail
–
USB Upgrade Success/Fail
–
DVR Setup Change by Remote
–
Before/After Time Adjust
System Log deletion procedure is as follows:
–
Execute Clear All Data in SYSTEM>Information>Record and choose ‗OK‘ on the popup dialogue box. Please note that
all normal recorded video data are deleted from database.
–
Press Factory Reset Switch on the back panel. Please note that the entire menu setup is also defaulted.
4.2.5
Exit
Please click (
)
SYSTEM>Exit, and choose ‗OK‘ on the popup dialogue box to exit from the setting.
4.2.6
Shutdown
Shutdown is a function to help you safely turn off DVR. Please use the proper shut down procedure to avoid damaging to
our DVR system. Do not remove the power during shut down.
Click (
)
SYSTEM>Shutdown, and then choose ‗OK‘ on the dialogue box to confirm.
When you select Shutdown menu, the OSD menu on the screen disappears.
Reboot the DVR after Shutdown. Turn off the DVR and wait for 5 seconds before restart.
4.3
DISPLAY
Please click (
) DISPLAY, and the following screen will appear.
4.3.1
OSD
Please click (
) DISPLAY>OSD, and the following screen will appear.
CAUTION
DO NOT TURN DVR OFF WITHOUT USING THE PROPER SHUT DOWN PROCEDURE. OTHERWISE, IT MAY CAUSE DAMAGE
TO YOUR DVR. ALWAYS REMOVE THE POWER AFTER SHUT DOWN.
CAUTION
ANY CHANGES MADE IN SETUP ARE APPLIED AFTER EXIT.
