29
Adjust interval for ‗X4 Split Screen sequencing‘.
Check
check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to
3>5>10>15>30>60
seconds
by each press.
‗4 Split Screen sequencing‘ is disabled in the following modes.
–
8 channel DVR:
3x3 Mode
–
16 channel DVR:
4x4 Mode
Use only with 16 channel DVR.
Adjust interval for ‗X9 Split Screen sequencing‘.
Check
check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to
3>5>10>15>30>60
seconds
by each press.
‗9 Split Screen sequencing‘ is disabled in 4X4 Mode.
4.3.3
Spot Monitor
Please click (
) DISPLAY>Spot Monitor, and the following screen will appear.
This menu will allow adjust interval of channel sequencing of Spot monitor.
Click (
) Spot Select to choose Spot monitor to be set up.
Check (check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to
3>5>10>15>30>60
seconds
by each press.
4.3.4
Spot monitor control on display mode
Every click of the ―SPOT‖ menu item on mouse right click menu will indicate ―SP‖ and ―SP1‖, on the right bottom of main
monitor.
After ―SP1‖, the it shows nothing. And system gets out of spot monitor control mode.
- SP mode : Sequence is automatically activated as configured on Spot monitor Setup menu.
- SP1 mode : Displayed channel on Spot monitor 1 can be changed by pressing channel button.
Sequence stops at ―SP1‖ mode.
4.4
DEVICES
Please click (
) DEVICES, and the following screen will appear.
(NOTE)
THIS FUNCTION IS ENABLED ONLY WHEN
B Type model
X9 Seq
