33
Click (
) the keyboard icon on the right-hand side of SMTP Server frame, and the virtual keyboard will appear. Please
register IP of SMTP Server (mail server on the sender side) (e.g., kornet.net).
Click (
) the keyboard icon on the right-hand side of Sender ID frame, and the virtual keyboard will appear. Please register
an ID to the sender mail server (e.g., tony123).
Click (
) the keyboard icon on the right-hand side of Sender Password frame, and the virtual keyboard will appear. Please
register a password having registered to the sender mail server.
When an event occurs, you can send an email to a designated mail address by clicking Attach button and selecting Data to
be transmitted. You may select one of JPEG, VIDEO CLIP, None modes. In case of transmitting VIDEO CLIP Data, set the
duration of time for recoded images in Duration item (e.g., 1 sec, 3 sec, 5 sec).
4.4.2
Camera/PTZ
Please click (
) DEVICES>Camera/PTZ, and the following screen will appear.
Give titles to cameras and choose PTZ protocols.
Click (
) the keyboard icon on the right-hand side of each frame on Title column, and the virtual keyboard will appear. Then,
register titles of cameras.
If you check
a check box on No column, a video of the corresponding camera is recorded and displayed on the monitor.
However, if you do not check the checkbox, both recording and monitor display stop. Then, DVR picture, instead of a
recorded video, will be displayed on the monitor.
If you check
a check box on Convert column, a video is recorded but is not displayed on the monitor.
Click (
) each frame on PTZ column to select PTZ protocols connected to a corresponding camera.
Click (
) each frame on Set to set PTZ Settings connected to a corresponding camera.
If you click (
Default
), proper number of selected PTZ will appear automatically. Please choo
se ‗OK‘ to confirm the setting.
Menu, Tour, and Pattern help you to use OSD function of PTZ camera.
PTZ camera itself supports OSD menu, use the setup value to more easily enter and use the OSD menu even in DVR.
If OSD enter command is 95 + PSET for example, designate 95 for Menu item,
if shortcut key to use Tour function is 71 ~79 + PSET, designate 70 for Tour item, and
if shortcut key to use Pattern function is 81 ~ 89 + PSET, designate 80 for Pattern item.
The setting information herein is used for PAN/TILT control in 5.1.5 (to be described).
CAUTION
WHEN YOU EXCLUDE A CORRESPONDING CAMERA VIDEO FROM RECORDING AND MONITOR DISPLAY (CHECK A CHECK
BOX
), MAKE SURE CHANNELS OF LARGE NUMBERS ARE EXCLUDED FIRST.
