i
Respond Touch Technical Manual 13
Turning Automaton On/Off
The Automaton is for testing purposes ONLY
. The automaton allows the
remote to randomly select an answer to any questions it receives
1.
Press the power button
to turn on the Touch remote.
2.
When the remote’s UID is displayed at the bottom of the main splash screen,
press the following buttons in order: F2
, Backspace
, and Flag
.
3.
From the diagnostics screen, press the soft button under CFG.
4.
From the Configure Unit screen, select the soft key under MIS.
5.
Press the soft button under ATO to turn on (ATO is highlighted) and off the
automaton.
6.
Press F1
to save.
7.
Power off the remote.
Turn Remote on in Programming Mode
1.
Press and hold the F1
button.
2.
Press and release the power
button without letting go of F1
button.
3.
When USB Program Utility appears, let go of F1
.
4.
Remote will shut off when it has completed programming.
Turn Remote on in Configuration Mode
Remotes must be turned on in configuration mode to run auto configuration on a remote
group. Auto configuration changes the channel for remotes and base in a remote group.
1.
Press the power button
to turn on the Touch remote.