i
Respond Lite Technical Manual 9
2.
Press the Flag
button.
3.
Press 2 from the numeric keypad
and press SEND
.
4.
When Address is displayed on the screen press SEND
. (This number
should never be changed).
5.
At Power press SEND
.
6.
At Channel press SEND
.
7.
When “Debug” displays on the remote screen use the Up and Down
arrows to turn the Automaton on (yes) or off (no).
8.
Press SEND
twice to save and turn off the remote.
Turn Remote on in Programming Mode
1.
Press and hold the F1
button.
2.
Press and release the power
button without letting go of F1
button.
3.
When USB Program Utility appears, let go of F1
.
4.
Remote will shut off when it has completed programming.
Turn Remote on in Configuration Mode
Remotes must be turned on in configuration mode to run auto configuration on a remote
group. Auto configuration changes the channel for remotes and base in a remote group.
1.
Press the power button
to turn on the Lite remote.
2.
Press the Flag
button.
3.
Press 3 from the numeric keypad
and press SEND
.