3-3 Wireless Setup
Wireless LAN
The Wireless LAN Setup page can change the wireless network settings. From this page you
can set the
SSID
, enable the
Broadcast SSID
or not, choose the
Channel / Frequency
,
specifies the
Data Rate
and
Output Power
.
Figure 3-8 Wireless LAN page
SSID:
The SSID is a unique ID used by Access Points and Stations to identify a wireless LAN.
Wireless clients associating to any Access Point must have the same SSID. The default SSID
is “Wireless”. To change the SSID, type in the SSID you like to use. It is case sensitive and
must not exceed 32 characters.
Broadcast SSID:
For security concern, you can choose not to broadcast your network’s SSID.
To turn off the broadcast of the SSID, click “No” check box next to
“Broadcast SSID”. And the
outdoor radio will refuse the connection requests from whose are not aware the Network ID.
But certainly the outdoor radio can be easily connected well when you realize the Network ID.
The default setting is “Yes”.
Wireless Mode:
Auto (11g/11b) / 802.11b only / 802.11g only
RedFire 200e Radio User Manual
Chapter 3 Configuring the 802.11g Radio
Wireless Setup
27
Summary of Contents for RedFire 200e
Page 1: ......