authentication in place can use WPA with 802.1x (WPA-EAP / Enterprise Mode). Small
business and home wireless LAN can use WPA without 802.1x (WPA-PSK / Pre-Shared Key).
In cooperation with RADIUS, systems with WPA-EAP will be used with a new encryption
method called Temporal Key Integrity Protocol (TKIP) implementation with 802.1x dynamic
key exchange.
This function will allowed to be configured after finished setting the Radius server and disable
the WDS mode.
WPA-PSK:
If selected, you must use TKIP encryption, and enter the WPA Pre-Shared Key.
WPA Pre-Shared Key:
In the WAP-Pre-Shared Key field, you may enter 8-63 characters
ranging from “a-z”, “A-Z”, and “0-9”.
Lagacy 802.1x and WPA with Radius are working in Access Point mode only (Disable
the WDS), and allowed to be cinfigured after finish setting the Radius sever.
Data Encryption:
Select the desired potion. If enabled (64 bit WEP, 128 bit WEP, 152 bit WEP), the keys must
have the same encryption strength and must be the same with the keys that other wireless
stations use. The TKIP option is automatically activated when either “
WPA with Radius
”, or
“
WPA-PSK
” is enabled.
WEP Passphrase:
There are two methods for creating WEP data encryption:
z
Using a Passphrase: Type in a passphrase and click “Generate Keys”. Passphrase can
be a mixture of numbers and letters. When entering passphrase, you must not exceed
32 characters. As you type, this outdoor radio will use an algorithm to generate 4 keys
automatically. Select one key from the 4 WEP keys.
z
Manually:
64 bits WEP: Enter 10 hexadecimal digits (between 0-9, a-f and A-F).
RedFire 200e Radio User Manual
Chapter 3 Configuring the 802.11g Radio
Wireless Setup
31
Summary of Contents for RedFire 200e
Page 1: ......