Remote Management
Figure 3-23 Remote Management page
Remote Console
Secure Shell (SSH)
If Secure Shell is enabled, the RedFire 200e will only allow remote access via Secure Telnet.
SNMP
Enable SNMP to allow the SNMP network management software to manage the outdoor radio
via SNMPv2 protocol.
Read Community Name:
Allow the SNMP manager to read the MIB objects of the outdoor
radio. The default setting is “public”.
Write Community Name:
Allow the SNMP manager to write the MIB objects of the outdoor
radio. The default setting is “private”.
IP Address to Receive Traps:
The IP address of the SNMP manager to receive traps sent
from the outdoor radio.
RedFire 200e Radio User Manual
Chapter 3 Configuring the 802.11g Radio
Management
45
Summary of Contents for RedFire 200e
Page 1: ......